DS18B20 Waterproof Temperature Sensor Probe | Stainless Steel Digital Thermometer
Original price was: ₵40.00.₵38.00Current price is: ₵38.00.
Measure liquid temperature with digital precision. This is the waterproof version of the famous DS18B20 sensor. Encased in a stainless steel tube, it is perfect for measuring water, soil, or air temperature in harsh environments.
-
Range: -55°C to +125°C
-
Interface: 1-Wire Digital (Requires only 1 pin)
-
Cable Length: 1 Meter
-
Best For: Aquariums, boilers, soil temperature, and cold chain monitoring.
The DS18B20 Waterproof Temperature Probe is a high-precision digital sensor designed for accurate temperature measurement in liquids, air, and harsh environments. Featuring a fully waterproof stainless steel casing, this probe is ideal for Arduino, Raspberry Pi, ESP8266, and industrial IoT applications.
🔹 One-Wire Communication for Easy Integration & Multiple Sensors ⚡
✔ Temperature Range: -55°C to +125°C (±0.5°C accuracy between -10°C and +85°C).
✔ Communication Protocol: One-Wire (Supports multiple sensors on a single data line).
✔ Waterproof Stainless Steel Probe: Ideal for wet & outdoor environments.
✔ Operating Voltage: 3.0V – 5.5V (Compatible with Arduino & Raspberry Pi).
✔ Cable Length: 1m, 2m, or more (varies by model).
✔ Durability: Resistant to rust, corrosion, and harsh environmental conditions.
🔹 Applications – Where to Use the DS18B20 Waterproof Sensor 🛠️
✔ Liquid Temperature Monitoring – Measure water, oil, and chemical temperatures.
✔ Aquarium & Hydroponics Systems – Monitor fish tanks, ponds, and plant systems.
✔ Smart Home & IoT Projects – Automate temperature control in smart environments.
✔ Weather Stations & Outdoor Monitoring – Use in environmental sensing applications.
✔ Industrial & Lab Equipment – Measure accurate temperatures in harsh conditions.
🔹 How to Use & External Resources 📚
The DS18B20 sensor communicates via One-Wire protocol, allowing multiple sensors to run on a single data pin. It works with Arduino, Raspberry Pi, ESP32, and STM32 and requires a 4.7kΩ pull-up resistor for stable operation.
📖 Helpful Resources for DS18B20 Waterproof Temperature Probe:
✔ DS18B20 Datasheet & Pinout
✔ Arduino Guide for DS18B20
✔ Raspberry Pi DS18B20 Temperature Sensor Setup
✔ YouTube Tutorials – DS18B20 Sensor with Arduino & Raspberry Pi
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a DS18B20 Waterproof Temperature Probe in Ghana? Whether for liquid temperature monitoring, IoT automation, or weather stations, this high-accuracy, stainless steel sensor is a must-have. Order today for fast delivery across Ghana!
Related products
1-Channel 5V Relay Module | Low Level Trigger for Arduino
Control high voltage safely. This single-channel relay allows your Arduino to switch high-power devices like light bulbs, water pumps, or fans. It isolates your 驯服儿媳免费观看全集电视剧中文版 from the high voltage using an internal switch.
-
Trigger: Low Level (Connect Signal to GND to turn ON).
-
Max Load: 250V AC / 10A.
-
Indicators: Red Power LED + Green Status LED.
-
Best For: Smart Lamps, Fan Control, and Simple Automation.
DS3231 RTC Real-Time Clock Module
The DS3231 is a highly accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO).
-
Chip: Maxim DS3231 (High Precision)
-
Memory: Built-in AT24C32 32K I2C EEPROM
-
Voltage: 3.3V – 5.5V DC
-
Interface: I2C (SCL, SDA)
-
Battery Backup: Holds time when power is off (Coin cell slot included)
-
Accuracy: Much higher than the standard DS1307
HC-SR501 PIR Motion Sensor Module | Infrared Detector for Arduino
Build your own burglar alarm or automatic light. The HC-SR501 detects human and animal movement by sensing body heat. It is the standard motion sensor for Arduino security projects.
-
Range: Adjustable (3 to 7 meters)
-
Output: 3.3V Logic (High when motion detected)
-
Features: Adjustable Time Delay & Sensitivity
-
Ideal For: Automated lighting, security systems, and robotics.
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
MQ-2 Smoke & Gas Sensor Module | LPG, Butane, Hydrogen Detector
- Detects: Smoke, LPG, Propane, Hydrogen, Methane.
- Sensitivity: High (Adjustable).
- Response Time: < 10s.
- Best For: Fire Alarms, Gas Leak Detectors, and Industrial Safety.
NEO-6M GPS Module V2 with Ceramic Antenna | Flight Controller & Tracker
-
Chipset: U-Blox NEO-6M.
-
Antenna: High-gain Active Ceramic Antenna (Included).
-
Data Retention: EEPROM + Battery (Saves configuration).
-
Best For: Drone Flight Controllers, Vehicle Trackers, and Speedometers.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
Reviews
There are no reviews yet.